Assembly
For easiest assembly,unpack all cage parts and lay them out in groups as the diagram ,you'll see several different parts for a given number . Your cage parts are contained in it.

Important
Should avoid internal surface of cone transmission counter(5) or tapered (6) surface. Waterproof cloth can prevent waste / urine flow.

Step 1:
Suck urine collection ring (14) at the inclined front end of the collecting funnel. Ensure that the nozzle of ring urine down Put the collection funnel low in the lower container(13). Rolling along the position of the lower edge shall be suitable for the funnel scroll. Put the tapered separation device on the funnel, and make the taper arm bracket suitable for the funnel and put other part of the cage aside.

Step 2:
With circular lip facing up, slide Metabolic cage support (7) into white crossbars on stand. Place rat grid supported (11) on top of the support plate. Handles of the support grid should rest on four raised tabs on circular lip of plate.

Step 3:
Put the rat cage (2) in the grid support, lock the rat cage lid (1) of three tank lug cage lattice above the adjusted side by side in a line, so that the lid around clockwise.

Step 4:
The feeding inlet drawer (4) sliding into the feeding inlet device (3) until the drawer is locked. The feeding device box is inserted into the cage above rat cage (2) the appropriate opening.

Step 5:
The bottle support(10) into the entrance hove rat cage (2) the appropriate opening. The bottle (9) is arranged on the support, with a suction tube is inserted into the hole. The flow collecting pipe on the funnel collecting pipe (12) supported semi ring.

Step 6:
The lattice below attachment lattice in the above, and with three shape on the cage lattice like three ribs are arranged in the notch groove, which rose and ensure the safety of cage lattices is clockwise rotation.
The funnel used for collection of rat urine (15) inserted below the center hole of the bottom of the cage. Second with Funnel collecting pipe (12) inserted underneath the cage lattice on the floor of the second hole. In this way, your cage is completely assembled.